Skip to main content
Repeatable scenario executionAvailable summer 2027

ScenX Automatic ADAS test execution system

Automated ADAS testing, run after run

ScenX executes your test procedure, measures every run with infrastructure sensors and reports pass or fail.

ScenX
ScenX Automatic ADAS test execution system: a roadside sensor station tracks a test vehicle parking between two cars on the proving ground, measures its position and clearances, streams the data to the cloud and reports each run; runs alternate between pass and fail.

How it works

  1. 01

    Define

    Turn your procedure into steps.

  2. 02

    Execute

    Run the scenario automatically.

  3. 03

    Measure

    Track positions and clearances live.

  4. 04

    Report

    Get pass or fail for every run.

  • Repeatable execution
  • Live run monitoring
  • Automatic pass/fail reports
  • Complete run history

The complete test site around ScenX

We design, build and run the measurement system for your test area.

  • Sensor-system design

    Stations, cameras and LiDARs sized for your area.

  • Optimal sensor placement

    Position and angle of every sensor for full coverage.

  • Network infrastructure

    Reliable links from every station.

  • Computing hardware

    Computers sized for sensing and evaluation.

  • Tailored to your goals

    What, when and where you need to measure.

  • Faster validation

    Automated procedures, repeatable results.

Why choose ScenX

Automation makes every development cycle more cost-effective.

  • 24/7 operation

    Tests run day and night, without waiting for a test crew.

  • Precise repeatability

    Every run follows the same procedure, so results stay comparable.

  • Fewer people on site

    Automatic execution needs far less human resource per test.

  • Automatic measurement and evaluation

    Infrastructure sensors measure every run and evaluate it right away.

  • Lower development cost

    Faster, cheaper test cycles make ADAS development more cost-effective.

Intelligent roadside sensor system

Smart Road System

A motorway that sees its traffic

Roadside camera, thermal and LiDAR stations on the M1–M7 motorway build a live digital twin of every vehicle. Together with our partner Magyar Közút (Hungarian Public Roads), we develop and operate the system and the high-level services built on it.

Smart Road System: the labeled M1–M7 digital twin with 3D object boxes shown next to the synchronised real roadside camera feed of the same traffic.

How it works

  1. 01

    Observe

    Roadside stations detect every vehicle.

  2. 02

    Twin

    TwinStreamer™ Engine builds the live scene.

  3. 03

    Assist

    Drivers get personalised messages.

  4. 04

    Record

    Traffic becomes labeled data.

  • Camera, thermal and LiDAR stations
  • Live digital twin of traffic
  • Personalised driver messages
  • Trajectory data
  • 3D object labels
  • Manifest with every release

Services on the smart road

What the roadside sensors and the live digital twin make possible.

  • Cooperative perception

    Vehicles and the infrastructure share the objects they detect.

  • Accident detection

    Detects incidents automatically, estimates their severity from vehicle dynamics, saves the raw data for reconstruction and alerts authorities and drivers.

  • Dangerous driving detection

    Spots driving that puts others at risk and sends a warning.

  • Personalised driver messages

    Driver-assistance messages based on the current state of traffic.

  • Cloud-controlled protection vehicle (TAM)

    Drives the slow-moving vehicle that diverts traffic around lane closures from the cloud.

  • Road works warning

    Warns vehicles as they approach maintenance and construction sites.

  • Emergency vehicle warning

    Tells drivers that a vehicle with blue lights is approaching, so it gets through faster.

  • Merging assistant

    Recommends the best speed for joining the motorway from the acceleration lane.

  • Congestion reduction

    Recommends the optimal speed to keep traffic jams from forming.

  • Traffic-dependent speed limits

    Lowers the speed limit in heavy traffic or bad weather.

  • Dynamic lane management

    Opens extra lanes to traffic depending on the load.

  • Lane load and travel time

    Shows how busy each section is and how long it takes to pass.

  • Trajectory planning in the infrastructure

    Plans and sends vehicle-specific trajectories to avoid accidents and resolve special situations.

  • Vehicle-generated traffic data

    Vehicles share what their own sensors measure with the infrastructure.

  • Dynamic tolling

    Toll charges that follow the current load on the motorway.

Personalised driver assistance

Messages tailored to each driver

The digital twin knows where every vehicle is and what is ahead of it. Our mobile app uses it to send each driver warnings and advice for their own situation, even in cars without driver-assistance sensors.

  • Warnings about hazards ahead, for the driver’s own lane and position
  • Works in any car through the driver’s phone
  • Based on the live digital twin of the motorway

Traffic data

Use the recorded traffic in your project

The system records real motorway traffic. Order labeled camera, thermal and LiDAR data, 3D object labels and trajectory data for the stations, sensors and time range you need.

Open the data shop
Cloud-based and remote vehicle control

CloudControl

From a shared scene to vehicle motion

CloudControl guides connected vehicles through cloud-planned trajectories or Teleoperation by a remote operator. Infrastructure perception and TwinStreamer Engine provide the shared scene for path following, live replanning, mixed-reality tests and remote driving.

CloudControl project highlights: proving-ground driving, cloud-based path following, trajectory replanning around a pedestrian dummy, and a mixed-reality pedestrian scenario.

In cooperation with

TU Wien, Stard
· High-speed cloud control
Virtual Vehicle
· Low-speed tests

From perception to the planned path

  1. 01

    Observe

    Bring infrastructure observations into the shared digital twin.

  2. 02

    Plan

    Calculate the vehicle’s trajectory in the cloud.

  3. 03

    Follow

    Send the planned path to the connected vehicle.

  4. 04

    Adapt

    Replan as physical or virtual road users change the scene.

  • Cloud-based trajectory planning
  • Teleoperation with live operator feedback
  • Connected vehicle path following
  • Infrastructure perception feedback
  • Physical and virtual test scenarios
Included in CloudControl

Teleoperation

Drive a vehicle from across the world

Teleoperation lets you control vehicles through TwinStreamer Engine with low latency. Demonstrated from Los Angeles by remotely driving a real car at ZalaZONE in Zalaegerszeg, Hungary — approximately 9,986 km away in a straight line.

Use Teleoperation when a human operator needs to drive remotely, alongside CloudControl’s cloud-based trajectory planning capability.

Recorded demonstration
CloudControl · Teleoperation: a remote operator in Los Angeles controls a vehicle at ZalaZONE in Zalaegerszeg, Hungary, through TwinStreamer Engine. Approximately 9,986 km of straight-line separation and a measured 170 ms round-trip ping during the demonstration, with control commands and video/digital-twin feedback.

From the operator to the vehicle

  1. 01

    Connect

    Link the remote operator and vehicle through TwinStreamer Engine.

  2. 02

    See

    Receive live camera and digital-twin feedback.

  3. 03

    Control

    Send low-latency steering and driving commands.

  4. 04

    Follow

    Observe the vehicle’s response through the shared scene.